Firma YUSCO je predstavnik firme ROYAL MAKINE za teritoriju Srbije, Crne Gore, Bosne i Hercegovine, Hrvatske.
ROYAL MAKINE je jedna od vodećih kompanija u sektoru proizvodnje mehaničkih i hidrauličnih distributera betona proizvedenih po najvećim svetskim standardima kvaliteta ali i estetike i ergonomije.
ROYAL MAKINE koristi najnovije tehnologije proizvodnje u svim fazama projekta, od dizajna proizvoda do same upotrebe.
ROYAL MAKINE uspešno se proširila na sve delove sveta i postala firma sa brzo rastućim udelom izvoza.
ROYAL MAKINE sa svojim iskusnim radnicima nastavlja da obezbeđuje zadovoljstvo kupaca u stalnoj potrazi za pronalažanjem najboljeg i najekonomičnijeg rešenja.
Firma YUSCO kao predstavnik ROYAL MAKINE za zemlje Balkana pruža usluge prodaje, montaže, servisiranja u garantnom i van garantnog roka, prodaje rezervnih delova kao i rentiranja distributera u skladu sa željama korisnika.
Sa zadovoljstvom Vas obaveštavamo da smo isporučili dva hidraulična distributera za beton H32+4 koji će biti namontirani na jednom od najreprezentativnijih objekata u Srbiji u ulici Kneza Miloša u Beogradu.
• Hydraulic concrete distributor H 12 is the most practical and the lightest model of the class.
• H 12 have the opportunity of easy replacement, by being single piece, not requiring any assembly or disassembly and lightweight construction.
• In addition to 12 meters total boom length, it has 3 meters end hose.
• Shear walls, columns and floor concretes can be poured.
• H 12 is manufactured with 2 arm sections as standart however can be produced as 3 arm sections.
• H 12 have the opportunity of easy replacement, by being single piece, not requiring any assembly or disassembly and lightweight construction.
• In addition to 12 meters total boom length, it has 3 meters end hose.
• Shear walls, columns and floor concretes can be poured.
• H 12 is manufactured with 2 arm sections as standart however can be produced as 3 arm sections.
| FEATURES | SIZE |
|---|---|
| Working Area radius | 12 m. |
| Working Area | 452 m2 |
| End Hose Length | 3 m. |
| Slewing Angle | 360° (Free) |
| Machine Weight | 2000 kg |
| Ballast Weight | 1500 kg |
| Total Weight | 3500 kg |
| Control | Manuel |
| Electric Motor | 5,5 kW, 380 - 400 V, 3 Phaze |
| Hydraulic Oil Tank | 50 litre |
| Maximum System Pressure | 250 Bar |
View the embedded image gallery online at:
https://www.yusco.rs/sr/table/royal/#sigProId892c688a17
https://www.yusco.rs/sr/table/royal/#sigProId892c688a17
Hydraulic concrete distributor H 15 can be used on both leg set and mast set.
On the leg frame usage, can be used at different buildings simultaneously because of not being mounted to the building.
H 15 can be splitted into 2 main parts, according to tower crane lifting capacity. H 15 is the lightest model of the class.
H 15 is the indispensable concrete distributor of the large-scale projects.
Especially preferred at the restricted ceiling height, such as tunnel,damn and hydroelectric plant projects.
With the Z boom design, can be rolled and folded at the 4.8 meter ceiling height With the optional walking group, can be moved by the help any kind conctsruction machine inside the tunnel
On the leg frame usage, can be used at different buildings simultaneously because of not being mounted to the building.
H 15 can be splitted into 2 main parts, according to tower crane lifting capacity. H 15 is the lightest model of the class.
H 15 is the indispensable concrete distributor of the large-scale projects.
Especially preferred at the restricted ceiling height, such as tunnel,damn and hydroelectric plant projects.
With the Z boom design, can be rolled and folded at the 4.8 meter ceiling height With the optional walking group, can be moved by the help any kind conctsruction machine inside the tunnel
| FEATURES | SIZE |
|---|---|
| Working Area radius | 15 |
| Working Area | 710 m2 |
| Total Boom Length | 15.000 mm |
| End Hose Length | 3 m |
| Slewing Angle | 360 ° (Free) |
| Machine Weight | 2900 kg |
| Ballast Weight | 2000 kg |
| Total Weight | 4900 kg |
| Control | Manuel- Optional Radio Control |
| Electric Motor | 7,5 kW, 380 - 400 V, 3 Phaze |
| Hydraulic Oil Tank | 80 liters |
| Maximum System Pressure | 300 bar |
View the embedded image gallery online at:
https://www.yusco.rs/sr/table/royal/#sigProId5361203213
https://www.yusco.rs/sr/table/royal/#sigProId5361203213
Mechanical concrete distributors are economical solutions with low cost where the mobile concrete pumps or the stationary placing booms cannot have access
Mechanical concrete distributors have the opportunity of easy replacement, by being single piece, lightweight construction and not requiring any assembly and disassembly Generally preferred at the tunnel formwork and floor concrete casting
Our mechanical concrete distributors can easily be rotated by rotary table and bearing system.
Mechanical concrete distributors have the opportunity of easy replacement, by being single piece, lightweight construction and not requiring any assembly and disassembly Generally preferred at the tunnel formwork and floor concrete casting
Our mechanical concrete distributors can easily be rotated by rotary table and bearing system.
| FEATURES | SIZE |
|---|---|
| Working Area Radius | 12 m. |
| Working Area | 452 m2 |
| Total Boom Length | 12.000 mm |
| Slewing Angle | 360° (Free) |
| Machine Weight | 1.200 kg |
| Ballast Weight | 1.200 kg |
| Total Weight | 2.400 kg |
| Transport Length | 8.840 mm |
| Trasnport Width | 1.430 mm |
| Transport Height | 2.100 mm |
View the embedded image gallery online at:
https://www.yusco.rs/sr/table/royal/#sigProIddc43856a9d
https://www.yusco.rs/sr/table/royal/#sigProIddc43856a9d
Hydraulic concrete distributor H 18 can be used on both leg set and mast set.
On the leg frame usage, can be used at different buildings simultaneously because of not being mounted to the building.
H 18 can be splitted into 3 main parts, according to tower crane lifting capacity.
H 18 is the longest and the lightest model of the class.
H 18 is the indispensable concrete distributor of the large-scale projects. Especially preferred at the shopping mall, hotel and hospital construction projects.
On the leg frame usage, can be used at different buildings simultaneously because of not being mounted to the building.
H 18 can be splitted into 3 main parts, according to tower crane lifting capacity.
H 18 is the longest and the lightest model of the class.
H 18 is the indispensable concrete distributor of the large-scale projects. Especially preferred at the shopping mall, hotel and hospital construction projects.
| FEATURES | SIZE |
|---|---|
| Working Area radius | 18 m. |
| Working Area | 1017 m2 |
| Total Boom Length | 18.000 mm |
| End Hose Length | 3 m. |
| Slewing Angle | 360° (Free) |
| Machine Weight | 3700 kg |
| Ballast Weight | 2400 kg |
| Total Weight | 6100 kg |
| Control | Radio Control Optional |
| Electric Motor | 7,5 kW, 380 - 400 V, 3 Phaze |
| Hydraulic Oil Tank | 80 litre |
| Maximum System Pressure | 330 Bar |
View the embedded image gallery online at:
https://www.yusco.rs/sr/table/royal/#sigProIdfcb2ed0241
https://www.yusco.rs/sr/table/royal/#sigProIdfcb2ed0241